![]() The USB-1208LS updates in software-paced mode only.Īll devices offer two 12-bit analog outputs with a range 5 V. One analog output updates at a maximum rate of 100 S/s two analog outputs update at a maximum rate 50 S/s each. This device offers two 10-bit analog outputs with a range 5 V. The maximum analog output update rate for all devices depends on several factors, including USB port speed. The channels can be non-consecutive, but must be listed in increasing order. The USB-1208FS-Plus/1408FS-Plus channel-gain queue can contain up to eight unique channels in SE mode and up to four unique channels in DIFF mode. The USB-1208LS channel-gain queue list can contain up to eight channels in SE mode and up to four channels in DIFF mode. The gain settings are stored in a channel-gain queue list that is written to local memory on the device. Each channel can have a different gain setting. The channel-gain queue feature lets users configure a list of channels and gains for each scan. USB-1208FS-Plus/1408FS-Plus: In hardware-paced mode, the USB-1208FS-Plus can sample at a maximum of 50 kS/s, and the USB-1408FS-Plus can sample at a maximum of 48 kS/s. The device also supports BURSTIO mode into the 4 kS FIFO at rates to 8 kS/s. USB-1208LS: When scanning in hardwarepaced mode, the USB-1208LS can sample at a maximum of 1.2 kS/s. ![]() The USB-1408FS-Plus These devices provide eight, 13-bit SE analog inputs or four, 14-bit DIFF analog inputs.Īll devices support softwareselectable ranges that provide inputs from in a DIFF configuration, and a SE configuration. The USB-1208LS and USB-1208FS-Plus provide eight, 11-bit SE analog inputs or four, 12-bit DIFF analog inputs. Maximum sample rates ranging from 1.2 kS/s to 50 kS/sĪll devices available with enclosure and screw terminalsīoard-only OEM versions of -Plus devices also available Low-cost USB DAQ devices with 4 differential or 8 singleended analog inputs The USB-1208LS offers sample rates to 1.2 kS/s, while all USB-1208FS-Plus and USB-1408FS-Plus devices (standard and OEM) offer sample rates to 50 kS/s.Īll devices in this series also support multiple software-selectable voltage input ranges, making them ideally suited for a wide assortment of measurements. ![]() All devices in this series offer four differential (DIFF) or eight singleended (SE) analog inputs, two analog outputs, 16 digital I/O and one event counter. The USB-1208FS-Plus/LS/1408FS-Plus Series consists of low-cost analog and digital I/O devices. Eight of the digital I/O on the USB-1208FS-Plus/1408FS-Plus can be used for high-current (24 mA) connections. NET, DASYLab®, LabVIEW™, MATLAB®, Linux®, and Python™.Īll devices in this series offer eight singled-ended or four differential analog inputs, two analog outputs, 16 digital I/O, and one counter input. Drivers are included for the most popular applications and programming languages, including Visual C++®, Visual C ®, Visual Basic®. Data can be viewed in real-time or post-acquisition on user-configurable displays. Software support includes DAQami, an out-of-the-box application for data logging, visualization, and signal generation. Each device supports one 32-bit TTL-level counter that accepts inputs up to 1 MHz. ![]() Digital I/O can be programmed on each 8-bit port (Port A and Port B) for either input (default) or output. All devices provide 16 TTL-level digital I/O lines. The USB-1208FS-Plus and USB-1408FS-Plus offer two 12-bit analog outputs with a range of 0 V to 5 V. The USB-1208LS offers two 10-bit analog outputs with a range of 0 V to 5 V. All devices support software-selectable ranges that provide inputs from ☑ V to ☒0 V in a DIFF configuration and ☑0 V in a SE configuration. The USB-1408FS-Plus provides eight 13-bit SE analog inputs or four 14-bit DIFF analog inputs. The USB-1208LS and USB-1208FS-Plus provide eight 11-bit SE analog inputs or four 12-bit DIFF analog inputs. These devices are USB-powered and require no external power. All devices in this series also support multiple software-selectable voltage input ranges, making them ideally suited for a wide assortment of measurements. The USB-1208LS offers sample rates of up to 1.2 kS/s, while all USB-1208FS-Plus and USB-1408FS-Plus devices offer sample rates of up to 50 kS/s. All devices in this series offer four differential (DIFF) or eight single-ended (SE) analog inputs, two analog outputs, 16 digital I/O, and one event counter. Details, datasheet, quote on part number: 6069-410-062 Partĭigilent's measurement computing USB-1208FS-Plus/LS/1408FS-Plus series consists of low-cost analog and digital I/O devices.
0 Comments
Leave a Reply. |